AO Smith BN51 2Hp 2 Speed 48Fr Motor
A BN51 is a 48 Frame, 2 Horsepower. 230Volt 2 speed, thru-bolt pump motor with stand from AO Smith. Spa manufactures often put "marketing horsepowers" on their motors, we suggest you look at the amperage of the motor you are replacing and purchase one that is rated equal or higher. A BN51 motor is rated for 10.5amps on high speed. Putting a smaller amperage on your current wet end can cause for premature motor failure that is not covered by the warranty. When replacing a pump motor like a BN-51 we strongly recommend you replace the shaft seal at the same time. A previously used shaft seal may not seal correctly allowing for leakage into the motor.
If you have questions reading the information from your pump motor please see our motor label page, or watch our quick video. As always we are here to help if you have a question email or call us.
This BN-51 Pump Motor Specs:
- 2 Horsepower
- 2 Speed
- 48 Frame
- Thru Bolt
- 230 Volts
- 10.5 / 2.6 Amps.
- 3450 RPM
Double check your high speed and low speed wires before hooking p your motor. Different brand motors have they in different locations. If you have any question please give us a call.
Spa Parts Online only sells new and motors. We can not stress enough the unreliability of reconditioned or rebuilt spa motors; we can however rebuild your motor. Read our blog on reconditioned motors.
Manufacturer: AO-Smith
Manufacturer Number: BN51
Manufacturer Warranty: 1 year part
